"TOTEM Carbon steel Taps are backed by 30 years of manufacturing experience, built upon the knowledge given earlier by its U. K. based Collaborators.
Today, TOTEM has set a standard of it's own which makes our Taps the largest selling, not only in domestic market but across the world"
The taps manufactured from first grade High Carbon Steel stringent inspection procedures ensures high quality.
Recommended for medium fit applications; for tapping non-ferrous material, soft ferrous material, sheet metal parts etc. Specific areas of usage would be in maintenance, garages, workshops and fabrication etc.
Totem carbon steel taps are available in various thread forms and sizes and are manufactured to the general dimensions given in BS 949 / 1951 and ANSI B 94-W 1971 for the NC / NF thread forms.
A Wide Range
Manufactured as per BS949
/ 1951 with Threads to Zone 5 and to ANSI B 94 - 9 for
NC / NF Thread Forms.
| Thread Forms |
Normal Range of Manufacture |
| BSW |
1/16" to 2" |
| BSF |
1/8" to 1.1/2" |
| BSB |
1/4" to 3/4" |
| UNC, UNF |
1/4" to 2" ; No. 2 to 12 |
| BSP, NPT |
1/8" to 2" |
| BS CON |
1/2" to 1.1/2" |
| BS Cy |
3/16" to 9/16" |
| WF |
11/64" to 1/2" |
| UNS |
1/8" to 1" |
| BA |
No. 0 to 12 |
| METRIC (Coarse & Fine) |
2 mm to 54 mm |
|
Our customer have
experienced that in most general purpose hand tapping
operations, TOTEM Carbon Steel
Taps can substitute HSS Taps,
thus giving you a Cost Saving
Of Nearly 67%.
TOTEM
Taps today are well accepted in over 25 countries around
the world; in SE Asia, Middle East, Africa, Europe,
Latin America and the U.S.A.
|
